Routine maintenance inspection of Fanuc control cabinet

1. Check if the indicator lights on the circuit board are lit abnormally;

2. Dust removal inside and outside the control cabinet;

3. Check if the components are securely connected;

4. Cleaning and sorting of teaching aids and cables;

Fanuc Robot Control Cabinet Measurement

1. Measure the incoming voltage, driving voltage, and power module voltage of the robot;

2. Detecting safety circuits (AS. GS. ES);

3. Detect the sensitivity of the teaching pendant buttons, as well as the functionality of the touch screen and LCD screen;

4. Check whether the calibration compensation value parameters of the robot are consistent with the factory configuration values;

5. Check if the robot can complete program backup and re import functions normally;

6. Optimize hard disk space to ensure normal operating space;

Fanuc Robot Maintenance Parts Replacement

1. Replacement of cooling fan for drive unit;

2. Replacement of dust filter screen in control cabinet;

3. Replacement of normally open and normally closed contacts of auxiliary contactors;

4. Fuse replacement;

5. Replace the indicator light inside the power button of the control panel motor.